Subject: From: Date:

RE: [ECS] Power Sentry & Secu 16 Doug Storey Tue, 16 Jan 2001 07:25:50 -0600

---

Rick,
Power Sentry
This sensor allows ECS to monitor your electrical power usage and estimate
your monthly bill. Inside every meter is a disk that rotates as electricity
is used. This sensor mounts on the outside of the meter glass and transmits
a pulse each time the disk completes a rotation (this represents 7.2
watt/hours on most meters). This output can be monitored via a
digital-input. It may also be connected directly to the INTERRUPT line of an
RS-232 cable, and monitored via a Serial-Byte Item.
Product name(s): Power Sentry
Distributor: Remote Measurement Systems (www.measure.com / 206-328-2255)
This is a cut and paste from ecs.htm. Mark also Details connection for the
PLC-Interface-2C) But thus far I have been unable to make it work with the
secu-16.

-----Original Message-----
From: Rick Mortensen [mailto:rmorten@can-be-scanned.com]
Sent: Monday, January 15, 2001 8:51 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] Power Sentry & Secu 16

Doug,
Could you be a little more specific regarding the Power Sentry?
----- Original Message -----
From: Doug Storey <dastorey@swbell.net>
To: <ecs-list@netbloc.com>
Sent: Sunday, January 14, 2001 3:35 PM
Subject: [ECS] Power Sentry & Secu 16

> I Finally got back to cutting the last 1/2 dozen circuits out of my time
> commander + and transferred over to the Applied Digital Secu 16's. The
time
> commander will be for sell shortly. ( Shameless ad )  All is well except
for
> making the Power Sentry work.  Has anyone had experience with this combo.
> If so please share the connection scheme for the 4 leads on the Power
> Sentry.
> Tks
> Doug Storey
>

---