Subject: From: Date:

Re: [ECS] CallerID-Int-A Daniel Dubay Fri, 11 Sep 1998 07:50:07 -0400

---

Actually Mark I didn't miss that one.  My machine still has to be
rebooted even after exiting the COMIO dos session.  Even restarting ECS
didn't help.  I don't know why?

Dan Dubay

>>> Mark Gilmore <markgilmore@cococo.net> 09/11 10:38 AM >>>
GOOD point Dan, but all you need do is to exit the DOS session
used in accessing the com port.

Daniel Dubay wrote:
> 
> Hello Bill,
> Can you test that port with another device?  I found that I had to
> reboot my computer after using COMIO before the port would work
again.
> 
> Good Luck
> 
> Dan Dubay
> 
> >>> Bill Walters <bwalters@fastlane.net> 09/10 1:44 PM >>>
> All -
> 
> I've found it necessary to move my Caller-ID interface from serial
> port
> #1 to serial port #7.  However, with interface port re-defined, I'm
> not
> receiving any caller-id info.  I've run COMIO and verified that COM7
> is
> functional and receiving data from the caller-id box but ECST (3.3)
> refuses to "see" it.  If I change it back to COM1, it works
> flawlessly.
> Oh yes, I've run SETUP (remember, ECST 3.3 here) and verified
correct
> IRQ/Address settings for COMM's 5/6/7/8.
> 
> Any suggestions appreciated!
> 
> Bill Walters
> (not so techno-geek, I guess!)

-- 
Mark Gilmore
Omnipotence
http://members.a2zsol.com/omnipotence.html

---