Subject: From: Date:

Re: [ECS] ECS->HV Video test J Gary Mull Mon, 13 Jul 1998 21:21:40 -0400

---

Mark - Will this work on ECS/ECST?

        Gary

At 07:55 PM 7/13/98 -0700, you wrote:
>For any ECS/HOMEVISION users,
>If you have the time, please help us test the ECS->HV
>video output via the following procedure:
>
>1) Connect the HV VIDEO OUTPUT to your TV's VIDEO INPUT
>2) Run ECSW, using the attached X.CFG file ("ECSW X.CFG")
>3) Define the serial port as required for the PLC-INTERFACE-2J Item
>4) Set the following Items to EXECUTE:
>	VC:Init OSD
>	VC:Display ON
>	VC:Start Menu
>5) Let us know what the display looks like (mine looks
>   wavy as if it needs a "horizontal hold" adjustment)
>
>THANKS MUCH
>-- 
>Mark Gilmore
>Omnipotence
>http://ourworld.compuserve.com/homepages/mark_gilmore_2|Item:PLC-Interface-
2J		Type:PLC-Interface-2J		Acc:User/User
>|	Initial State:(None)					Backup:No
>|	Serial Port  :Disconnected
>|	Station #    :0
>|Item:VC:Init OSD		Type:Command-J			Acc:User/User
>|	Initial	State:(None)					Backup:No
>|	Station	#    :0
>|	Command      :L1100
>|	Timeout      :2
>|Item:VC:Display ON		Type:Command-J			Acc:User/User
>|	Initial	State:(None)					Backup:No
>|	Station	#    :0
>|	Command      :L0501
>|	Timeout      :2
>|Item:VC:Start Menu		Type:Command-J			Acc:User/User
>|	Initial	State:(None)					Backup:No
>|	Station	#    :0
>|	Command      :L0800
>|	Timeout      :2
>
>|Group:	Video
>|	VC:Init OSD
>|	VC:Display ON
>|	VC:Start Menu
>|	End
>
jgary@atl.mindspring.com   Gary at Home 
jgmull@us.ibm.com          Gary at Work

---