Subject: From: Date:

Re: [ECS] Phone-Interface-C Don Stephens Sun, 24 Jan 1999 17:14:50 -0800

---

Hi Mark:

  I ended up commenting out all the commands after the ATZ command, which I
assume means that the remote and callerID functions are disabled.  I tried a
Win comm program and could access the modem with no problem, and I could
manually type in all the PHN_C.SET commands which the modem replied 'OK". I
moved back into ECS and got the same error message:
"modem error responding to AT#CLS=8"

Another problem showed up later in the day, which was a message saying that
"access was denied Win error #005" or something like that.  Rebooting the
computer allowed ECS to again access the modem, but still wouldn't take the
AT commands found in PHN_C.SET. I will try and give you the exact access
error if it shows up again.

Thanks;
Don
----- Original Message -----
From: Mark Gilmore <omnip@usit.net>
To: <ecs-list@netbloc.com>
Sent: Sunday, January 24, 1999 4:38 PM
Subject: Re: [ECS] Phone-Interface-C


>Don, insert a ";" as the 1st char in that line
>and try it out.
>
>West.Net wrote:
>>
>> Hi:
>>   Still fighting the good fight with my Zoom VFP14.4V Modem. Using
Bitcoms
>> comm program I can stuff all of the commands that are found in PHN_C.SET
and
>> will get an OK after each command. However when I load ECS, there is an
>> error msg after the AT command AT#VTD=FF,FF,FF. Doesn't make sense to me.
>> Can anyone comment?
>> Thanks:
>> Don
>
>--
>Mark Gilmore
>Omnipotence (ECS Home Automation Software)
>omnip@usit.net
>http://www.usit.com/omnip
>

---