Subject: From: Date:

Re: [ECS] USR Mark Gilmore Tue, 16 Feb 1999 08:09:32 -0800

Tue, 16 Feb 1999 08:09:32 -0800

---

Hi Greg,
ECS supports most (if not all) of the modems
based on the "ROCKWELL VOICE" chipset.
PHN_C.SET is attached. If your modem accepts the
commands therein, then it will work fine.

Greg Johnson wrote:
> 
> Hi,
> 
>   I'm curious if anyone is or has used a USR sportster modem to do any
> kind of ECS caller ID?  IF you are could you send me your Phn_c.set file?
> 
> Thanks,
> Gregory Johnson
> diggins@teleport.com

-- 
Mark Gilmore
Omnipotence (ECS Home Automation Software)
omnip@usit.net
http://www.usit.com/omnip

---

|ATZ			// reset
?|AT$$H8&W		// disable HOT-SCAN feature
|ATX4			// send ALL responses
|AT#CLS=8		// enter voice mode (for DTMFs, etc)
|AT#VTD=FF,FF,FF	// ena ALL DTMFs, ALL modes
|AT#VRA=60		// remote phone "answered" if no ring after 6 secs
|AT#VRN=60		// remote phone "answered" if no ring after 6 secs
|AT#VBT=1		// .1 sec beeps
?ATS30=60		// assure recovery if DTE dies (???)
|AT#VSP=50		// silence tmo = 5 secs ???
|AT#VLS=4		// line-input, spkr & line/handset ena
|AT#CID=2		// enable caller-id

---