Subject: From: Date:

Re: [ECS] Phone line with PBX Mark Gilmore Wed, 24 Feb 1999 20:44:36 -0800

---

Don,
Try setting the Text Item to SPEAK->PC:HS.
It should then be routed thru the handset.
Does it play fast ?

Don wrote:
> 
> Two questions, now that I have my phone-interface-c working. (Thanks again,
> Mark) Is anyone using a PBX and if so, how are the incoming and outgoing
> lines routed through the modem. I have the line side of my Zoom going to the
> extension side of the PBX but this blocks the caller-ID. If I switch the
> lines so that the port marked Line on the modem goes to a splitter where the
> phone line is connected to the PBX I can't use the modem to page, which
> brings up my second question. I have created a Phone-Call Item with the
> Message Item pointing to a Text Item. When I set the Phone-Call Item to
> call, it does, but when I answer the phone from the other line,  the Message
> Item is spoken so fast I can't understand it. Anyone run into this?
> Thanks;
> Don

-- 
Mark Gilmore
Omnipotence (ECS Home Automation Software)
omnip@usit.net
http://www.usit.com/omnip

---