Subject: From: Date:

Re: [ECS] Phone line with PBX Don Wed, 24 Feb 1999 18:39:04 -0800

---

  Sure does...Anyway to slow it down?
Don
----- Original Message -----
From: Mark Gilmore <omnip@usit.net>
To: <ecs-list@netbloc.com>
Sent: Wednesday, February 24, 1999 8:44 PM
Subject: Re: [ECS] Phone line with PBX


>Don,
>Try setting the Text Item to SPEAK->PC:HS.
>It should then be routed thru the handset.
>Does it play fast ?
>
>Don wrote:
>>
>> Two questions, now that I have my phone-interface-c working. (Thanks
again,
>> Mark) Is anyone using a PBX and if so, how are the incoming and outgoing
>> lines routed through the modem. I have the line side of my Zoom going to
the
>> extension side of the PBX but this blocks the caller-ID. If I switch the
>> lines so that the port marked Line on the modem goes to a splitter where
the
>> phone line is connected to the PBX I can't use the modem to page, which
>> brings up my second question. I have created a Phone-Call Item with the
>> Message Item pointing to a Text Item. When I set the Phone-Call Item to
>> call, it does, but when I answer the phone from the other line,  the
Message
>> Item is spoken so fast I can't understand it. Anyone run into this?
>> Thanks;
>> Don
>
>--
>Mark Gilmore
>Omnipotence (ECS Home Automation Software)
>omnip@usit.net
>http://www.usit.com/omnip
>

---