Subject: From: Date:

Re: [ECS] Reset interfaces remotely David Mccoll Mon, 1 Mar 1999 14:05:00 -0800

---

I second that. My IR-Master is not used for receiving at all and has been
flawless for many years.

David M

-----Original Message-----
From: Michael David <michaeld@michaeldavid.com>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Sunday, February 28, 1999 6:58 AM
Subject: Re: [ECS] Reset interfaces remotely


>Hi Mark!
>
>You know - mine has too - for at least 7 years now.  I'm always surprised
at
>how other people have problems with theirs.
>
>One thing I know I am doing differently than most, is that I don't use the
>unit for receiving i/r signals at all, other than to learn the codes
>initially.  All I do is transmit i/r signals.
>
>Cheers!
>
>Michael David
>michael@michaeldavid.com
>----- Original Message -----
>From: Mark Gilmore <omnip@usit.net>
>To: <ecs-list@netbloc.com>
>Sent: Sunday, February 28, 1999 10:47 AM
>Subject: Re: [ECS] Reset interfaces remotely
>
>
>FYI:The reason I wanted to pursue this further is that MY
>IR-Master behaves flawlessly (and has for years now).
>I would ask that any that have had such problems email
>me your model # (on the unit) and your ECS.DT. Thanks.
>
>Don wrote:
>>
>> Atta Way, Mark!
>>
>> ----- Original Message -----
>> From: Mark Sekelsky <Mark@sekelsky.com>
>> To: <ecs-list@netbloc.com>
>> Sent: Saturday, February 27, 1999 2:31 PM
>> Subject: RE: [ECS] Reset interfaces remotely
>>
>> >At this point I am going to stop worrying about the JunkMaster (I can
>still
>> >send you ecs.dt if you want it). I found that this time I couldn't get
>the
>> >interface to reset at all, even after a complete shut down and reboot.
I
>> >had ordered a Home Vision while my wife wasn't looking and now have it
>> fully
>> >up and running my IR, with PLC coming right behind it.
>> >
>> >Mark S
>> >
>> >-----Original Message-----
>> >From: Mark Gilmore [mailto:omnip@usit.net]
>> >Sent: Saturday, February 27, 1999 5:40 PM
>> >To: ecs-list@netbloc.com
>> >Subject: Re: [ECS] Reset interfaces remotely
>> >
>> >
>> >You can set the Item to RESET, but it won't help
>> >if a power-down on the IR-master is required.
>> >This should be reproducable without ACE.
>> >Try mimicking the same behavior with an Event.
>> >What is your "signal delay" parameter ?
>> >Please email me your ECS.DT.
>> >
>> >Mark Sekelsky wrote:
>> >>
>> >> Mark,
>> >>
>> >> In using ACE with the IR Master I find that it is pretty easy to
create
>a
>> >> "not responding error."  I don't beleive this has anything to do with
>> ECS.
>> >> To correct this I need to unplug the IR Master and then go to the item
>> >> editor and click on the "reset" button.
>> >>
>> >> I have tried to reset the IR remotely by resetting it via an event.
>(ex.
>> >If
>> >> reset is now true then IR Master set reset).  This isn't working.  Is
>> >there
>> >> a way to reset the interface without going to my ECS PC?
>> >>
>> >> Mark S
>> >
>> >--
>> >Mark Gilmore
>> >Omnipotence (ECS Home Automation Software)
>> >omnip@usit.net
>> >http://www.usit.com/omnip
>> >
>
>--
>Mark Gilmore
>Omnipotence (ECS Home Automation Software)
>omnip@usit.net
>http://www.usit.com/omnip
>
>
>

---