Subject: From: Date:

Re: [ECS] Flex-port - multiport one more time David Mccoll Wed, 3 Mar 1999 02:52:04 -0800

---

I have a feeling that you will have to make an adjustment for PCI addresses
that are at 8000 and up. I don't think most PCI cards will use the ISA base
addresses unless an emulator is installed.

David M

-----Original Message-----
From: Mark Gilmore <omnip@usit.net>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Tuesday, March 02, 1999 6:41 PM
Subject: Re: [ECS] Flex-port - multiport one more time


>Doug, just make it anything less than 400 that does'nt
>conflict with something else: ECS/WIN only uses these for
>conflict checking, and I had NO idea that you could have
>I/O ports above 400.
>
>dastorey wrote:
>>
>> Ok told you we were in a hurry - We went with the FlexPort PCI 4s.  It is
>> installed and using com 6 through 9.  Our problem is now windows is happy
>> but ECS say we have an invalid base address. Windows shows the resources
as
>> D800 and Irq 12. We went to settings and put in cd80 for Com 6-9 and then
>> saved it. Now ECS when you try to use these, it allows you to assign them
>> but says the Com 6 or 7, the 2 that we have defined in ECS, base is
invalid.
>> Any insight? BTW we also tried c800 with no luck.
>
>--
>Mark Gilmore
>Omnipotence (ECS Home Automation Software)
>omnip@usit.net
>http://www.usit.com/omnip
>

---