ecsl@netbloc.com: 3644: Re: [ECS] HV-PC

Subject:
From:
Date:

Re: [ECS] HV-PC
Tom Hutchins
Sat, 6 Mar 1999 20:32:18 -0500

Sat, 6 Mar 1999 20:32:18 -0500

Kevin,

Just to be sure, I went ahead and reloaded the schedule ect into the module. But still
no luck. Talked to Mark G and he thinks it may have something to do with a new release
from HV ver. 2.62b. What version software are you running?. Also, everything works from
the IR remote.

Thanks,
Tom
    -----Original Message-----
    From: Kevin Keast <libertyc@prodigy.net>
    To: ecs-list@netbloc.com <ecs-list@netbloc.com>
    Date: Saturday, March 06, 1999 7:19 PM
    Subject: RE: [ECS] HV-PC
    
    
    Tom,  Ensure you have a schedule loaded into the controller.  And that HV-PC controlling
software is not using the com port.  Should work.
     
    Kevin
        -----Original Message-----
        From: Tom Hutchins [mailto:hutchins ta@fuse.net]
        Sent: Saturday, March 06, 1999 3:32 PM
        To: ecs-list@netbloc.com
        Subject: [ECS] HV-PC
        
        
        I'm installing the HV-PC on my system. Got the unit set up and it works for
sending/ receiving X120 IR ect. But when I try to have ECS recognize it ie connect the
COM1 for PLC interface 2J I get the message "ERROR:missing data: 21 Cmd:Illegal Data".
And ECS won't send / recieve commands.
        I looked in the Help file and that error message isn't listed.
         
        Any thoughts
         
        Tom

Kevin,

Just to be sure, I went ahead and reloaded the schedule ect into the module. But still no luck. Talked to Mark G and he thinks it may have something to do with a new release from HV ver. 2.62b. What version software are you running?. Also, everything works from the IR remote.

Thanks,

Tom

-----Original Message-----
From: Kevin Keast <libertyc@prodigy.net>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Saturday, March 06, 1999 7:19 PM
Subject: RE: [ECS] HV-PC

Tom, Ensure you have a schedule loaded into the controller. And that HV-PC controlling software is not using the com port. Should work.

Kevin

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 3:32 PM
To: ecs-list@netbloc.com
Subject: [ECS] HV-PC

I'm installing the HV-PC on my system. Got the unit set up and it works for sending/ receiving X120 IR ect. But when I try to have ECS recognize it ie connect the COM1 for PLC interface 2J I get the message "ERROR:missing data: 21 Cmd:Illegal Data". And ECS won't send / recieve commands.

I looked in the Help file and that error message isn't listed.

Any thoughts

Tom