ecsl@netbloc.com: 3651: RE: [ECS] HV-PC

Subject:
From:
Date:

RE: [ECS] HV-PC
Mark Sekelsky
Sat, 6 Mar 1999 20:46:50 -0600

Sat, 6 Mar 1999 20:46:50 -0600

Tom,

Thanks.  I felt adventuresome already.  I have no trouble with 2.62b.  Even
created a new schdule and uploaded. Communicates with ECS just fine. That
doesn't solve your problem but it should eliminate the software.

Have you tried a different com port?

Mark S
    -----Original Message-----
    From: Tom Hutchins [mailto:hutchins_ta@fuse.net]
    Sent: Saturday, March 06, 1999 8:22 PM
    To: ecs-list@netbloc.com
    Subject: Re: [ECS] HV-PC


    Must be bored or something. The update is at the HV-PC software site
http://www.csi3.com/hv_p3pc.htm

    Tom

        -----Original Message-----
        From: Mark Sekelsky <Mark@sekelsky.com>
        To: ecs-list@netbloc.com <ecs-list@netbloc.com>
        Date: Saturday, March 06, 1999 9:14 PM
        Subject: RE: [ECS] HV-PC


        Looks like we are on-line at the same time.  I don't see a version
2.62b on the web site.  The update I found is for the version I already
have.  After that it is beta version 2.7.

        Mark S
            -----Original Message-----
            From: Tom Hutchins [mailto:hutchins_ta@fuse.net]
            Sent: Saturday, March 06, 1999 8:03 PM
            To: ecs-list@netbloc.com
            Subject: Re: [ECS] HV-PC


            Mark,

            Good luck!

            Tom
                -----Original Message-----
                From: Mark Sekelsky <Mark@sekelsky.com>
                To: ecs-list@netbloc.com <ecs-list@netbloc.com>
                Date: Saturday, March 06, 1999 8:59 PM
                Subject: RE: [ECS] HV-PC


                Tom,

                I'll download the update, and assuming I feel adventuresome
tomorrow I'll load and see if it causes a problem for me with ECS.

                Mark S
                    -----Original Message-----
                    From: Tom Hutchins [mailto:hutchins_ta@fuse.net]
                    Sent: Saturday, March 06, 1999 7:56 PM
                    To: ecs-list@netbloc.com
                    Subject: Re: [ECS] HV-PC


                    Mark S.,

                    My Help/About says 2.62b. I downloaded it from the web
site because I was having a problem w/ the version that came w/ the system.
It wouldn't load and gave an error message about the splash screen or
something. Anyway the web site indicated that 2.62b fixed this particular
problem. Just hope it didn't create a new one.

                    Thanks,

                    Tom
                        -----Original Message-----
                        From: Mark Sekelsky <Mark@sekelsky.com>
                        To: ecs-list@netbloc.com <ecs-list@netbloc.com>
                        Date: Saturday, March 06, 1999 8:47 PM
                        Subject: RE: [ECS] HV-PC


                        Tom,

                        I don't know if it is version "b" or not (Help/About
doesn't day) but I am running version 2.62 with no trouble.

                        Mark S
                            -----Original Message-----
                            From: Tom Hutchins [mailto:hutchins_ta@fuse.net]
                            Sent: Saturday, March 06, 1999 7:32 PM
                            To: ecs-list@netbloc.com
                            Subject: Re: [ECS] HV-PC


                            Kevin,

                            Just to be sure, I went ahead and reloaded the
schedule ect into the module. But still no luck. Talked to Mark G and he
thinks it may have something to do with a new release from HV ver. 2.62b.
What version software are you running?. Also, everything works from the IR
remote.

                            Thanks,
                            Tom

Tom,

Thanks. I felt adventuresome already. I have no trouble with 2.62b. Even created a new schdule and uploaded. Communicates with ECS just fine. That doesn't solve your problem but it should eliminate the software.

Have you tried a different com port?

Mark S

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 8:22 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HV-PC

Must be bored or something. The update is at the HV-PC software site http://www.csi3.com/hv p3pc.htm

Tom

-----Original Message-----
From: Mark Sekelsky <Mark@sekelsky.com>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Saturday, March 06, 1999 9:14 PM
Subject: RE: [ECS] HV-PC

Looks like we are on-line at the same time. I don't see a version 2.62b on the web site. The update I found is for the version I already have. After that it is beta version 2.7.

Mark S

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 8:03 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HV-PC

Mark,

Good luck!

Tom

-----Original Message-----
From: Mark Sekelsky <Mark@sekelsky.com>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Saturday, March 06, 1999 8:59 PM
Subject: RE: [ECS] HV-PC

Tom,

I'll download the update, and assuming I feel adventuresome tomorrow I'll load and see if it causes a problem for me with ECS.

Mark S

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 7:56 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HV-PC

Mark S.,

My Help/About says 2.62b. I downloaded it from the web site because I was having a problem w/ the version that came w/ the system. It wouldn't load and gave an error message about the splash screen or something. Anyway the web site indicated that 2.62b fixed this particular problem. Just hope it didn't create a new one.

Thanks,

Tom

-----Original Message-----
From: Mark Sekelsky <Mark@sekelsky.com>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Saturday, March 06, 1999 8:47 PM
Subject: RE: [ECS] HV-PC

Tom,

I don't know if it is version "b" or not (Help/About doesn't day) but I am running version 2.62 with no trouble.

Mark S

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 7:32 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HV-PC

Kevin,

Just to be sure, I went ahead and reloaded the schedule ect into the module. But still no luck. Talked to Mark G and he thinks it may have something to do with a new release from HV ver. 2.62b. What version software are you running?. Also, everything works from the IR remote.

Thanks,

Tom