Subject: From: Date:

Re: [ECS] HV-PC Tom Hutchins Sun, 7 Mar 1999 14:42:58 -0500

Sun, 7 Mar 1999 14:42:58 -0500

---

Mark S.

As you saw earlier Mark G. figured it out. Analog sensors not available on HV-PC. Shoulda
seen that one myself;)
Thanks for your help and glad your being adventureous didn't cause problems!!

Tom
    -----Original Message-----
    From: Mark Sekelsky <Mark@sekelsky.com>
    To: ecs-list@netbloc.com <ecs-list@netbloc.com>
    Date: Saturday, March 06, 1999 9:47 PM
    Subject: RE: [ECS] HV-PC
    
    
    Tom,
     
    Thanks.  I felt adventuresome already.  I have no trouble with 2.62b.  Even created
a new schdule and uploaded. Communicates with ECS just fine. That doesn't solve your
problem but it should eliminate the software.
     
    Have you tried a different com port?
     
    Mark S
        -----Original Message-----
        From: Tom Hutchins [mailto:hutchins ta@fuse.net]
        Sent: Saturday, March 06, 1999 8:22 PM
        To: ecs-list@netbloc.com
        Subject: Re: [ECS] HV-PC
        
        
        Must be bored or something. The update is at the HV-PC software site http://www.csi3.com/hv
p3pc.htm
         
        Tom
         
            -----Original Message-----
            From: Mark Sekelsky <Mark@sekelsky.com>
            To: ecs-list@netbloc.com <ecs-list@netbloc.com>
            Date: Saturday, March 06, 1999 9:14 PM
            Subject: RE: [ECS] HV-PC
            
            
            Looks like we are on-line at the same time.  I don't see a version 2.62b
on the web site.  The update I found is for the version I already have.  After that
it is beta version 2.7.
             
            Mark S
                -----Original Message-----
                From: Tom Hutchins [mailto:hutchins ta@fuse.net]
                Sent: Saturday, March 06, 1999 8:03 PM
                To: ecs-list@netbloc.com
                Subject: Re: [ECS] HV-PC
                
                
                Mark,
                 
                Good luck!
                 
                Tom
                    -----Original Message-----
                    From: Mark Sekelsky <Mark@sekelsky.com>
                    To: ecs-list@netbloc.com <ecs-list@netbloc.com>
                    Date: Saturday, March 06, 1999 8:59 PM
                    Subject: RE: [ECS] HV-PC
                    
                    
                    Tom,
                     
                    I'll download the update, and assuming I feel adventuresome tomorrow
I'll load and see if it causes a problem for me with ECS.
                     
                    Mark S
                        -----Original Message-----
                        From: Tom Hutchins [mailto:hutchins ta@fuse.net]
                        Sent: Saturday, March 06, 1999 7:56 PM
                        To: ecs-list@netbloc.com
                        Subject: Re: [ECS] HV-PC
                        
                        
                        Mark S.,
                         
                        My Help/About says 2.62b. I downloaded it from the web site
because I was having a problem w/ the version that came w/ the system. It wouldn't load
and gave an error message about the splash screen or something. Anyway the web site
indicated that 2.62b fixed this particular problem. Just hope it didn't create a new
one.
                         
                        Thanks,
                         
                        Tom
                            -----Original Message-----
                            From: Mark Sekelsky <Mark@sekelsky.com>
                            To: ecs-list@netbloc.com <ecs-list@netbloc.com>
                            Date: Saturday, March 06, 1999 8:47 PM
                            Subject: RE: [ECS] HV-PC
                            
                            
                            Tom,
                             
                            I don't know if it is version "b" or not (Help/About doesn't
day) but I am running version 2.62 with no trouble.
                             
                            Mark S
                                -----Original Message-----
                                From: Tom Hutchins [mailto:hutchins ta@fuse.net]
                                Sent: Saturday, March 06, 1999 7:32 PM
                                To: ecs-list@netbloc.com
                                Subject: Re: [ECS] HV-PC
                                
                                
                                Kevin,
                                 
                                Just to be sure, I went ahead and reloaded the schedule
ect into the module. But still no luck. Talked to Mark G and he thinks it may have something
to do with a new release from HV ver. 2.62b. What version software are you running?.
Also, everything works from the IR remote.
                                 
                                Thanks,
                                Tom

---

-----Original Message-----
From: Mark Sekelsky <Mark@sekelsky.com>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Saturday, March 06, 1999 9:47 PM
Subject: RE: [ECS] HV-PC

Tom,

 

Thanks.  I felt adventuresome already.  I have no trouble with 2.62b.  Even created a new schdule and uploaded. Communicates with ECS just fine. That doesn't solve your problem but it should eliminate the software.

 

Have you tried a different com port?

 

Mark S

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 8:22 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HV-PC

Must be bored or something. The update is at the HV-PC software site http://www.csi3.com/hv p3pc.htm

 

Tom

 

-----Original Message-----
From: Mark Sekelsky <Mark@sekelsky.com>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Saturday, March 06, 1999 9:14 PM
Subject: RE: [ECS] HV-PC

Looks like we are on-line at the same time.  I don't see a version 2.62b on the web site.  The update I found is for the version I already have.  After that it is beta version 2.7.

 

Mark S

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 8:03 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HV-PC

Mark,

 

Good luck!

 

Tom

-----Original Message-----
From: Mark Sekelsky <Mark@sekelsky.com>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Saturday, March 06, 1999 8:59 PM
Subject: RE: [ECS] HV-PC

Tom,

 

I'll download the update, and assuming I feel adventuresome tomorrow I'll load and see if it causes a problem for me with ECS.

 

Mark S

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 7:56 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HV-PC

Mark S.,

 

My Help/About says 2.62b. I downloaded it from the web site because I was having a problem w/ the version that came w/ the system. It wouldn't load and gave an error message about the splash screen or something. Anyway the web site indicated that 2.62b fixed this particular problem. Just hope it didn't create a new one.

 

Thanks,

 

Tom

-----Original Message-----
From: Mark Sekelsky <Mark@sekelsky.com>
To: ecs-list@netbloc.com <ecs-list@netbloc.com>
Date: Saturday, March 06, 1999 8:47 PM
Subject: RE: [ECS] HV-PC

Tom,

 

I don't know if it is version "b" or not (Help/About doesn't day) but I am running version 2.62 with no trouble.

 

Mark S

-----Original Message-----
From: Tom Hutchins [mailto:hutchins ta@fuse.net]
Sent: Saturday, March 06, 1999 7:32 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HV-PC

Kevin,

 

Just to be sure, I went ahead and reloaded the schedule ect into the module. But still no luck. Talked to Mark G and he thinks it may have something to do with a new release from HV ver. 2.62b. What version software are you running?. Also, everything works from the IR remote.

 

Thanks,

Tom

 

---