Subject: From: Date:

Security-IFC-A Dan Dubay Sat, 01 Aug 1998 21:39:39 -0400

---

Hello Mark,

Here is cpt.tmp for my security-IFC-A problem:

SCT_A RX (21:25:34):08 07 b2 00 00 03 17 db  id=3 stat=17 13:Jeep=Secure/7
SCT_A RX (21:25:35):08 07 b2 00 00 0e 57 26  id=14
SCT_A RX (21:25:36):08 07 b2 00 00 01 37 f9  id=1 stat=37 TAMPER 13:Caravan=Tamp
er
SCT_A RX (21:25:37):08 07 b2 00 00 0e 17 e6  id=14
SCT_A RX (21:25:37):08 07 b2 00 00 0b 17 e3  id=11 stat=17 13:Maserati=Secure/7s
ct_a_tics[1]=7014689 itm_pc3[221]= EL_HS_G=157516
sct_a_tics[1]=7014689 itm_pc3[221]= EL_HS_G=157517 11:Caravan=Not Respondingsct_
a_tics[3]=7013109 itm_pc3[247]= EL_HS_G=157676
sct_a_tics[3]=7013109 itm_pc3[247]= EL_HS_G=157677 11:Jeep=Not Respondingsct_a_t
ics[11]=7016010 itm_pc3[756]= EL_HS_G=157388
sct_a_tics[11]=7016010 itm_pc3[756]= EL_HS_G=157388 11:Maserati=Not Responding
SCT_A TX (21:25:38):0a 02 0c 
SCT_A RX (21:25:38):07 02 09  ACK
CMD_PLC_TX_FF (21:25:39): hc=2/O uc=9/6 fnc=14/On lvl=0 cnt=0
PLC2C-TX: hc=2/O uc=9/6 fnc=14/On tx_cnt=94 plc2c_tx_cnt=0 rx_cnt=1
PLC_RX_FF (21:25:39): hc=2/O uc=9/6 tx=ff cnt=0 
PLC_RX_FF (21:25:39): hc=2/O fnc=14/On tx=ff cnt=3 
PLC_RX_FF_SRV_1: hc=2/O uc=9/6 tx=1 cnt=6 ok=1 CLEAR: hc=2/O SELECTED: hc=2/O uc
=9/6
PLC_RX_FF_SRV_1: hc=2/O fnc=14/On tx=1 cnt=3 ok=1
SCT_A RX (21:25:40):08 07 b2 00 00 03 17 db  id=3 stat=17 13:Jeep=Secure/7
SCT_A RX (21:25:41):08 07 b2 00 00 0e 57 26  id=14
SCT_A RX (21:25:42):08 07 b2 00 00 01 37 f9  id=1 stat=37 TAMPER 13:Caravan=Tamp
er
SCT_A RX (21:25:43):08 07 b2 00 00 0e 17 e6  id=14
SCT_A RX (21:25:43):08 07 b2 00 00 0b 17 e3  id=11 stat=17 13:Maserati=Secure/7

Is the not responding coming from the security interface or does ECS timeout
a transmitter when time is up?  This looks like ECS is doing the timing out?

Any thoughts on this problem?

Thanks!  Dan Dubay

---