Subject: From: Date:

Re: [ECS] IR Outs Carl Keyes Fri, 09 Apr 1999 16:51:42 +0000

---

Frank,

Try putting this in your autoexec.bat
and re-boot.

SET ECS_IR_TX_Q=0

later,

Carl

herronf@us.ibm.com wrote:

> I know this is not an ECS "problem" but something I am not
> understanding.
> Running ECST 4.0 with a HomeVision-PC.  Have been very pleased
> especially
> with its IR performance.
> I have a "speaking" event.  ECS closes the Speak Relay which causes
> all the
> zones to be connected to the amps.  Announcement made, ECS opens the
> speak
> relay.  Now I am trying to Mute a receiver say with an IR Command. 
> Even if
> I put the IR command first before picking the speak relay, ECS picks
> the
> Speak Relay, Speaks unpicks the relay and then mutes the Receiver.  Of
>
> course it is too late, you have now missed the announcement.  I know
> this
> has something to do with cycles or passes.
> On a related note I can not send two IR Signal commands in the same IF
> THEN
> statement.  Right now I am starting a timer. muting device one, two
> seconds
> later muting device 2.  Why is that happening?
>
> Again I know this is not an ECS problem, but something I am not
> understanding how IR-Signal-J is working

  

---