Subject: From: Date:

Re: [ECS] Homevision-PC Kevin Keast Tue, 04 May 1999 09:51:37 -0700

---

Just for fun try the following:

Create a brand new config file.  In other words copy and save your config file elsewhere
and remove it from 
c:/program files/ECS/

Create plc-interface-2j and see if the problem persists.


---
Kevin, d8)
libertyc@prodigy.net
keastk@ele.uri.edu



On Tue, 4 May 1999 08:04:46    Tony James wrote:
>I've also had this problem. It usually occurs when I unplug my HV from the
>laptop (which is usually running ECS) and plug it into my desktop to do a
>bit of playing.
>I get the "PLC-Interface-2J not responding to G00 on com2" message when I
>start ECS on the desktop. I usually cycle the power the HV (which doesn't
>make any difference) then start up the HV software to check the HV and comms
>are working OK which they are then reconnect to the laptop where everything
>works then go back to the desktop and it works OK as well!! Now it's been a
>while since I have 'played' like this so I can't recall the exact sequence
>of events. So although I doubt this helps much, Ken, you are not alone.
>I'm running Win95, with the HV on COM1 at 19200.
>Tony
>
>


Free web-based email, anytime, anywhere! 
ZDNet Mail - http://www.zdnetmail.com

---