Subject: From: Date:

Re: [ECS] Error code 98 J Gary Mull Thu, 08 Jul 1999 19:08:08 -0400

---

Twas not the PC (ECS) twas HV hardware........  HV unit has run fine since
I unplugged the HV unit and powered it back on.......  I never had to
reboot ECS......

      gary

At 08:30 PM 7/8/99 +0200, you wrote:
>J Gary Mull ha scritto:
>> 
>> Yesterday we had a storm and I came in to find HV not responding to the
>> puter.  A simple power off and a couple seconds wait and then power on did
>> the trick.  The on status light on Homevision was not on.
>> Got any ideas.......  everything, power, tele etc protected and computer on
>> a UPS........
>
>You'd need a watchdog... some device which, if the PC hangs for whatever
>reason, will turn off and on (after 15 seconds or so) the power.
>I built it with a CMOS IC and a relay.
>
>-- 
>Ciao,
>Dario
>--
>ADPM Synthesis sas - Torino
>--
>http://www.geocities.com/CapeCanaveral/2259
>
>
>
jgary@atl.mindspring.com   Gary at Home 
jgmull@us.ibm.com          Gary at Work

---