Subject: From: Date:

Re: [ECS] Error code 98 dario Fri, 09 Jul 1999 14:57:12 +0200

---

J Gary Mull ha scritto:

> Twas not the PC (ECS) twas HV hardware........  HV unit has run fine since
> I unplugged the HV unit and powered it back on.......  I never had to
> reboot ECS......
>
> >
> >You'd need a watchdog... some device which, if the PC hangs for whatever
> >reason, will turn off and on (after 15 seconds or so) the power.
> >I built it with a CMOS IC and a relay.
> >

OK. I meant you could have turned off the HV unit too, when the watchdog found it
dead.

Dario

---