Subject: From: Date:

RE: [ECS] 4.1.006 BETA upload Michael David Wed, 18 Aug 1999 21:49:25 -0400

---

Hi Mark!

Did you get a chance to look at the LMCID.TXT problem?

Cheers!

Michael David
michael@michaeldavid.com


-----Original Message-----
From:	Mark Gilmore [mailto:omnip@usit.net]
Sent:	Wednesday, August 18, 1999 2:38 PM
To:	ecs-list@netbloc.com
Subject:	[ECS] 4.1.006 BETA upload

I have uploaded http://www.usit.com/omnip/ecsb.zip (4.1.006 BETA).

TX15 testers: TX15.CFG is included for your convenience, and can
be used to test both models (THANKS).

	4.1.006 (08/18/99)

    72)	The TX15 and TX15-B X-10 thermostats are now directly supported
	via new Types HVAC-INTERFACE-C and HVAC-INTERFACE-D.

*   73)	The numeric PHONE-INTERFACE-D States have been replaced by names
	(the "PHONE-INTERFACE-DX" custom Type is no longer required).

*   74)	Per #69 above, the time that ECS sleeps may be adjusted by
	inserting this command in \AUTOEXEC.BAT:

		SET ECS_SLEEP_MSECS={msecs}

	E.G., "SET ECS_SLEEP_MSECS=200" would define a 0.2 sec sleep.
	SEE #75 BELOW BEFORE MAKING ANY ADJUSTMENT.
	If you were using this command before, note that it has been
	renamed (from "ECS_W95_SLEEP_MSECS").

*   75)	Per #69/#74 above, I corrected a mistake in which I had set
	the default sleep time to 10 (.01 secs) instead of 100 (.1 secs).
	ALSO, ECS now will sleep if it is behind by LESS than 1/2 second.
	Previously, it would not sleep if it was behind AT ALL
	(which rarely occurs).
-- 
Mark Gilmore
Omnipotence (ECS home automation software)
http://www.usit.com/omnip
omnip@usit.net
423-745-0026

---