Subject: From: Date:

Fw: Upgraded ECS 4.1 CID Tom Hutchins Sun, 22 Aug 1999 07:42:53 -0400

---

Mark Gilmore,
I've had 6-7 messages to you bounced back so I'm sending it this way
Tom
----- Original Message -----
From: Tom Hutchins <hutchins_ta@fuse.net>
To: Mark Gilmore <omnip@usit.net>
Sent: Saturday, August 21, 1999 10:04 PM
Subject: Re: Upgraded ECS 4.1 CID


> Mark,
>
> What is PR.TXT? I did a file search on PR.TXT and got nothing
>
> Before I upgraded from 4.0 to 4.1.005 I had CID working. When a call came
in
> it displayed and spoke the CID name and number info.
>
> After Upgrading when a call comes in I get nothing. No rings count, no CID
> #, no CID name - nothing
> SPEECH-INTERFACE-C is connected to the right port, I have made no changes
to
> anything but CID does not work!!!
>
> The only difference I can find is that during start-up or if I disconnect
> then reconnect SPEECH-INTERFACE-C I get the ERROR message " 9:21:54:
> ERROR:Open > error on "PHNC0.SET" (Item "Phone-Interface-C")" right after
> 'ECS at your service.
>
> I am using the following system
> 4.1.005 and Win 98
> Phone Blaster 28.8 modem
> 350 mhz AMD w/ 64MB ram
>
> Anything else?
>
> Tom
>
>
> ----- Original Message -----
> From: Mark Gilmore <omnip@usit.net>
> To: Tom Hutchins <hutchins_ta@fuse.net>
> Sent: Saturday, August 21, 1999 10:38 AM
> Subject: Re: Upgraded ECS 4.1 CID
>
>
> > Tom,
> > I need more info - please see PR.TXT.
> >
> > > Tom Hutchins wrote:
> > >
> > > Mark,
> > >
> > > Was able to get everything running OK with the upgrade. The only
> > > problem I'm having is w/ Caller ID. It was working great before
> > > upgrading but now it doesn't. I simply display/ speak the CID info. I
> > > looked through the upd.txt and saw that CALLER-ID-C is now CID-C but
> > > could find no reference to CALLER-ID-C in my ECS.CFG.
> > > I get an incoming call I get nothing.
> > > I'm using 4.1.005 and Win 98
> > > Phone Blaster 28.8 modem
> > > 350 mhz AMD w/ 64MB ram
> > > Any ideas?
> > >
> > > Tom
> >
> > --
> > Mark Gilmore
> > Omnipotence (ECS home automation software)
> > http://www.usit.com/omnip
> > omnip@usit.net
> > 423-745-0026
> >
>

---