| ECS-L Home Automation and Security Archives |
| Subject: From: Date: | Re: [ECS] Best security setup w/ ECS HV-PC Bill Walters Thu, 26 Aug 1999 16:28:55 -0500 |
Scott, As an ECS'er also with a Magnum Alert 800 panel, could you be a little more specific? perhaps via direct e-mail instead of the list? Thanks - Bill Walters ----- Original Message ----- From: Scott Danks <sdanks@ci.tulsa.ok.us> To: <ecs-list@netbloc.com> Sent: Thursday, August 26, 1999 3:26 PM Subject: Re: [ECS] Best security setup w/ ECS HV-PC Just an idea. My old home grown version used double pole double throw relays. I sent 12v to the sensors and back to the relays. One side of the relay went to the alarm system, and the other went to the digital inputs. The 12volts was from the alarm panel for the relays, so since the alarm panel (magnum alert 800) was always up. my system was completely independant. Also since it was relays, nearby lightning strikes didn't bother the relays, so my digital wire runs were only a foot or two. Scott >>> <hutchins.ta@pg.com> 08/26 1:35 PM >>> Carl, So what you are saying is look around, find the security system that has what I want but run all / some of the hardwired sensors though the HV-PC digital inputs then to the security panel. That way I can have ECS do 'cool stuff' (make announcements, phone calls ect) as well? Sounds like a great system!! Tom From: "Carl Keyes" <carlkeyes@hotmail.com> on 08/26/99 01:15 PM Please respond to ecs-list@netbloc.com To: ecs-list@netbloc.com cc: (bcc: Thomas Hutchins-TA/PGI) Subject: Re: [ECS] Best security setup w/ ECS HV-PC Tom, I've been using a Radio Shack 2 zone system for about 8 years now with very few false alarms. Our house is quite small so 2 zones is plenty, but they have others with more. They're easy to install and relatively inexpensive.I use all wired switches for the windows etc. I've found the wireless units to be very unreliable. Most any security system will accomodate the sensors you've mentioned but the real power does come from it's integration with ECS. I've wired some of my window switches through my digital inputs to ECS as well as back to the security unit so ECS can report,in any way you like, what has occured there. One of my favorite, "only with ECS" things is when I open my garage door with the remote it disables the alarm for 5 min allowing enough time to leisurely unpack or exit the car before the alarm units buzzers kick in. It reminds me verbally to enter the code to dis- arm. I doubt there's nothing that's not possible with ECS a decent alarm system, and some imagination. later, Carl >From: hutchins.ta@pg.com >Reply-To: ecs-list@netbloc.com >To: ecs-list@netbloc.com, comp.home.aut@pg.com >Subject: [ECS] Best security setup w/ ECS HV-PC >Date: Thu, 26 Aug 1999 07:49:41 -0400 > >I want to buy a security system for my home and would like to interface it >w/ my >automation system (ECS / HV-PC). I need to be able to have the following >capabilities: > >1) Latch-key (call me when kids get home from school) >2) Smoke / CO / Flood / Freeze monitoring >3) Be able to differentiate between the above and call me to let me know >which >one it is. >4) Be able to differentiate between zones (ie. 'An intruder has entered >through >the kitchen window' ect) >5) Wireless capability (retrofitting) but combination wireless / hardwire >best >6) Must be upgradable > >Obviously must be reasonably priced and be able to install myself >Any recommendations? > >Thanks >Tom > > _______________________________________________________________ Get Free Email and Do More On The Web. Visit http://www.msn.com