Subject: From: Date:

Re: [ECS] 4.2.002/4.2.003 release Bill Walters Wed, 10 Nov 1999 20:31:53 -0600

---

Mark,

Your message Subject line is "ECS 4.2.002/4.2.003" but in the "body" of your
message you use "ECS 4.1.002/4.1.003"...

Just trying to keep things "straight"...

Been working on networking/CU-SeeMe stuff all this week... That plus
refinishing a table and installing some new light fixtures in the house.....

I will be getting around to upgrading to 4.2, but won't be able to take it
on until next week (most likely)..

Bill Walters

----- Original Message -----
From: Mark Gilmore <omnip@usit.net>
To: <ecs-list@netbloc.com>
Sent: Wednesday, November 10, 1999 6:17 PM
Subject: [ECS] 4.2.002/4.2.003 release


> Hello all,
> ECS 4.1.002/4.1.003 has been released/uploaded,
> and incorporates these changes:
>
> 4.1.002 (11/09/99)
>
> *  160) The PHONE-INTERFACE-C "BITS/SAMPLE" & "SILENCE THRESHOLD"
> Parameters
> have been eliminated (NO change to ECS.CFG is required, as these
> lines will be ignored). The related modem setup commands are now
> specified in PHNC0.SET/PHNC1.SET (so as to allow customization
> for modems which require different commands).
>
>    161) A bug has been corrected which kept the entered password from
> being accepted if you clicked "OK" instead of pressing <Enter>.
>
>    162) Screen-captures are now supported via right-click popup menus.
>
>    163) <Ctrl-S> now saves (same as clicking <B>SAVE</B>).
>
>    164) A "CLEAR CONFIGURATION" selection is now in the "FILE" menu
> (for starting with an EMPTY cfg).
>
>    165) When an Item is renamed, ECS now updates any displayed Item
> names
> in the Group screen as appropriate. When an Item is deleted, any
> windows in the Group screen which specified that Item are closed.
>
>    166) I have "coded around" the CPU-XA X10-command "echo" problem:
> After transmitting an X10 command, ECS will ignore any "received"
> (echoed) commands until 1.5 seconds of "dead time" elapses.
> Once this bug is fixed in the CPU-XA, I will modify ECS to
> bypass this logic when the corrected revision is detected.
>
> 4.1.003 (11/10/99)
>
>    167) The ECS-Lite download will now run in Standard mode for 30 days
> (IF no valid authorization-code is found).
> --
> Mark Gilmore
> Omnipotence (ECS home automation software)
> http://www.usit.com/omnip
> 423-745-0026

---