Subject: From: Date:

Re: [ECS] windows finally Mark Gilmore Tue, 14 Dec 1999 10:22:19 -0500

---

Dan,
Your REDAC was reporting a value higher that "normal"
(I raised the max limit of ANALOG-INPUT-C Items to 32767).

I don't think I can do much about the framing error, as I
never fully tested the Vision-Plus under Win, and currently
don't have time to diagnose and/or solve the problem.
I can only tell you that one other customer is using
the VP without problem (perhaps they will respond), and
that I suspect that this error is triggered when ECS
and the VP both attempt to "talk" to each other at the
same time.
-- 
Mark Gilmore
Omnipotence (ECS home automation software)
http://www.usit.com/omnip
423-745-0026


Dan Carrington wrote:
> 
> Two errors are coming up regularly now.  Things are running, but the errors keep
> showing up.
> 
> Value 8191 is invalid selection (Item "analog-input-c")
>         also value 8190
> 
> CCE3:COM8 (comm err#8:RX framing err)(Item "security-IFC-B")
> 
> I have substituted the actual item type for my item name.
> 
> As to the value error, I never set that item to anything.  I just read it's
> status as an analog input.  I have a photo-resistor on the circuit to measure
> outside light.  It never complained with the same settings and events with 3.4
> dos ecs.  The input works.  However, I have at times seen it report very high
> numbers for one pass even though it is bright outside and the average reading
> varies from 0 to 4 at that brightness.  The security comm error I have no clues
> on.
> 
> On another note, is there any way to select the input source to record audio
> files from (line input or mic)?
> 
> Much thanks
> Dan Carrington

---