ECS-L Home Automation and Security Archives
  learn more | view messages for this month | NetBloc® | terms of use | search

Google
 


  subject (prev) or (next) | time (prev) or (next) | author (prev) or (next) | view more subjects

Subject:
From:
Date:		 Re: [ECS] problem upgrading
Don Stephens
Thu, 6 Jan 2000 06:32:32 -0800
Thu, 6 Jan 2000 06:32:32 -0800 
So to record TBS the VCR needs to be set to #57 while the cable box should be set to
#6 to watch it? Cute. How does one use a paper TV Guide? Are there two listing?

If this is the case, (Uggh) perhaps you need two TZ-(?).CHN. One for the VCR and one
for the cable box. When you run TVL.BAT which listings do you get, the basic or enhanced?
If you can figure out how to get both listings, maybe we can make this work.

Don
  ----- Original Message ----- 
  From: Thomas Hutchins-TA 
  To: ecs-list@netbloc.com 
  Sent: Thursday, January 06, 2000 6:20 AM
  Subject: Re: [ECS] problem upgrading


  Don,

  Many of the channel #'s are different between the basic and the std for example
  TBS is channel 6 on std and channel 57 on basic. Go figure.

  Tom


                                                                   
   Internet Mail Message                                           
   Received from host:                                             
   cr1001312-a.rchmd1.bc.wave.home.com                             
   [24.113.40.254]                                                 
                                                                   


  Envelope Sender:    ecs-list-return-6148-hutchins.ta=pg.com@netbloc.com

  From: donstephens@101freeway.com (Don Stephens) on 01/06/2000 09:03 AM

  Please respond to ecs-list@netbloc.com

  To:   ecs-list@netbloc.com
  cc:    (bcc: Thomas Hutchins-TA/PGI)
  Subject:  Re: [ECS] problem upgrading




  Tom:
   Am I to understand that your cable company's basic channel lineup is DIFFERENT
  than the enhanced cable..or do you need different IR-Signals for the VCR and
  Cable Box?
  Don
    ----- Original Message -----
    From: Thomas Hutchins-TA
    To: ecs-list@netbloc.com
    Sent: Thursday, January 06, 2000 5:24 AM
    Subject: Re: [ECS] problem upgrading


    All,

    Never mind about the announcement before recording part, figured that one out
    with help from Mark S. & Don.

    Now, my basic cable (TIME WARNER) is fed directly into the VCR on this set and
    so I don't need to use the cable box but rather the VCR to select the channel.
    However on my other set I will use the std cable box to change channels and
  the
    two don't necessarily use the same channel #'s(thanks TIME WARNER:-().
  Therefore
    I don't want to just set the cable channels to work with the VCR.

    To make a long story short would I create a new event called 'VCR chan set'
  and
    add a reference to it in TVR just like 'cable chan set' and use some logic to
    decide which "   chan set" to use?

    And to get really bizarre how hard would it be to have 2 TV-guides one for
  basic
    cable (VCR) and one for std cable box.

    If anyone has read this far and wondering why in the hell would anyone go to
    this much trouble it's because the cable box is in the living room and all
  hell
    would break loose if in the middle of 'Blues Clues' the TV switched to record
    the football game for me. So most of the recording will happen on the second
    TV/VCR but it doesn't get all of the cable channels and I can't afford the
  extra
    cable boxes just for this!

    Thanks,

    Tom



     Internet Mail Message
     Received from host:
     cr1001312-a.rchmd1.bc.wave.home.com
     [24.113.40.254]



    Envelope Sender:    ecs-list-return-6141-hutchins.ta=pg.com@netbloc.com

    From: "Tom Hutchins" <hutchins ta@fuse.net> on 01/05/2000 09:46 PM

    Please respond to ecs-list@netbloc.com

    To:   ecs-list@netbloc.com
    cc:    (bcc: Thomas Hutchins-TA/PGI)
    Subject:  Re: [ECS] problem upgrading




    Mark S.

    By editing the VCR:REC item I mean changing the 'ITEM' VCR:REC from IR SIGNAL
  to
    NUMBER and using that to store the IR signal ID. I couldn't see any reason to
    have items set up for IR-2B and then have to set up new ones for HV.
    As for the announce I thought that if TVL was set up to record a favorite it
    would speak a 'record warning' automatically, is that true?

    Tom
    ----- Original Message -----
      From: Mark Sekelsky
      To: ecs-list@netbloc.com
      Sent: Wednesday, January 05, 2000 8:23 PM
      Subject: RE: [ECS] problem upgrading


      I am not sure what you mean by editing VCR:REC, but if you mean editing the
    item in example.cfg the answer is no.  The HV unit needs to have your specific
    IR signals stored within it.

      I know what you mean about midnight announcements.  When I first started
    playing with the TVL events I had "Star Trek" announced like a gazillion times
    after midnight.  In my case I have a "flag" set when we are in bed.  I simply
    added a IF (might be a BEGINIF) statement to not make announcements if we were
    in bed.  Mark has this in example.cfg as well (If Awake is Not True, or
    something like that).  If you don;t have a status such as these you could
  easily
    incorporate a line(s) like:

      If    Time    Is LT    11:00 PM
      And    Time    Is GT 7:00 AM
      Then    TV Shows Announce    Set Speak

      Mark S
        -----Original Message-----
        From: Tom Hutchins [mailto:hutchins ta@fuse.net]
        Sent: Wednesday, January 05, 2000 7:06 PM
        To: ecs-list@netbloc.com
        Subject: Re: [ECS] problem upgrading


        Mark, Don, Paul,

        Thanks to all your help I have TV-Guide / TV-Listings up and running
    great!!!!!!!!
        I had two things wrong first of all I didn't realize that my TZ-E file was
    overwritten when I upgraded so I had to go back in and "start from scratch"
    adding "*"'s and changing the channel #'s. Secondly, when I cut and pasted
  some
    of the TVL items into ecs.cfg somehow some extra spaces got into the 'FILE : '
    lines and so ECS was looking for "   :  TVL.TXT" for example. So , a little
    editing repair work and now everything works great!!

        Now for a question. I want to get the VCR to record my favorites! I
    understand the selection of favs no problem. Now I need to get the 'IR stuff'
    working using my HV-PC w/ Xantech dual emitters plugged into the back. Help
  file
    describes how to input the IR signal data but I want to know if I can simply
    edit the existing VCR:REC ect items instead of starting over. Also, I don't
  need
    the Announcement along w/ the Record (am using the bedroom TV/VCR for this and
    the 'BOSS' will get very upset if the computer starts announcing that it will
    'Record Poirot in 60 seconds' at 2am!!!). Can this be done?

        Thanks,

        Tom
So to record TBS the VCR needs to be set to #57 while the cable box should be set to #6 to watch it? Cute. How does one use a paper TV Guide? Are there two listing?
 
If this is the case, (Uggh) perhaps you need two TZ-(?).CHN. One for the VCR and one for the cable box. When you run TVL.BAT which listings do you get, the basic or enhanced? If you can figure out how to get both listings, maybe we can make this work.
 
Don
----- Original Message -----
From: Thomas Hutchins-TA
To: ecs-list@netbloc.com
Sent: Thursday, January 06, 2000 6:20 AM
Subject: Re: [ECS] problem upgrading

Don,

Many of the channel #'s are different between the basic and the std for example
TBS is channel 6 on std and channel 57 on basic. Go figure.

Tom


                                                                
 Internet Mail Message                                          
 Received from host:                                            
 cr1001312-a.rchmd1.bc.wave.home.com                            
 [24.113.40.254]                                                
                                                                


Envelope Sender:    ecs-list-return-6148-hutchins.ta=pg.com@netbloc.com

From: donstephens@101freeway.com (Don Stephens) on 01/06/2000 09:03 AM

Please respond to ecs-list@netbloc.com

To:   ecs-list@netbloc.com
cc:    (bcc: Thomas Hutchins-TA/PGI)
Subject:  Re: [ECS] problem upgrading




Tom:
 Am I to understand that your cable company's basic channel lineup is DIFFERENT
than the enhanced cable..or do you need different IR-Signals for the VCR and
Cable Box?
Don
  ----- Original Message -----
  From: Thomas Hutchins-TA
  To: ecs-list@netbloc.com
  Sent: Thursday, January 06, 2000 5:24 AM
  Subject: Re: [ECS] problem upgrading


  All,

  Never mind about the announcement before recording part, figured that one out
  with help from Mark S. & Don.

  Now, my basic cable (TIME WARNER) is fed directly into the VCR on this set and
  so I don't need to use the cable box but rather the VCR to select the channel.
  However on my other set I will use the std cable box to change channels and
the
  two don't necessarily use the same channel #'s(thanks TIME WARNER:-().
Therefore
  I don't want to just set the cable channels to work with the VCR.

  To make a long story short would I create a new event called 'VCR chan set'
and
  add a reference to it in TVR just like 'cable chan set' and use some logic to
  decide which " chan set" to use?

  And to get really bizarre how hard would it be to have 2 TV-guides one for
basic
  cable (VCR) and one for std cable box.

  If anyone has read this far and wondering why in the hell would anyone go to
  this much trouble it's because the cable box is in the living room and all
hell
  would break loose if in the middle of 'Blues Clues' the TV switched to record
  the football game for me. So most of the recording will happen on the second
  TV/VCR but it doesn't get all of the cable channels and I can't afford the
extra
  cable boxes just for this!

  Thanks,

  Tom



   Internet Mail Message
   Received from host:
   cr1001312-a.rchmd1.bc.wave.home.com
   [24.113.40.254]



  Envelope Sender:    ecs-list-return-6141-hutchins.ta=pg.com@netbloc.com

  From: "Tom Hutchins" <hutchins ta@fuse.net> on 01/05/2000 09:46 PM

  Please respond to ecs-list@netbloc.com

  To:   ecs-list@netbloc.com
  cc:    (bcc: Thomas Hutchins-TA/PGI)
  Subject:  Re: [ECS] problem upgrading




  Mark S.

  By editing the VCR:REC item I mean changing the 'ITEM' VCR:REC from IR SIGNAL
to
  NUMBER and using that to store the IR signal ID. I couldn't see any reason to
  have items set up for IR-2B and then have to set up new ones for HV.
  As for the announce I thought that if TVL was set up to record a favorite it
  would speak a 'record warning' automatically, is that true?

  Tom
  ----- Original Message -----
    From: Mark Sekelsky
    To: ecs-list@netbloc.com
    Sent: Wednesday, January 05, 2000 8:23 PM
    Subject: RE: [ECS] problem upgrading


    I am not sure what you mean by editing VCR:REC, but if you mean editing the
  item in example.cfg the answer is no.  The HV unit needs to have your specific
  IR signals stored within it.

    I know what you mean about midnight announcements.  When I first started
  playing with the TVL events I had "Star Trek" announced like a gazillion times
  after midnight.  In my case I have a "flag" set when we are in bed.  I simply
  added a IF (might be a BEGINIF) statement to not make announcements if we were
  in bed.  Mark has this in example.cfg as well (If Awake is Not True, or
  something like that).  If you don;t have a status such as these you could
easily
  incorporate a line(s) like:

    If    Time    Is LT    11:00 PM
    And    Time    Is GT 7:00 AM
    Then    TV Shows Announce    Set Speak

    Mark S
      -----Original Message-----
      From: Tom Hutchins [mailto:hutchins ta@fuse.net]
      Sent: Wednesday, January 05, 2000 7:06 PM
      To: ecs-list@netbloc.com
      Subject: Re: [ECS] problem upgrading


      Mark, Don, Paul,

      Thanks to all your help I have TV-Guide / TV-Listings up and running
  great!!!!!!!!
      I had two things wrong first of all I didn't realize that my TZ-E file was
  overwritten when I upgraded so I had to go back in and "start from scratch"
  adding "*"'s and changing the channel #'s. Secondly, when I cut and pasted
some
  of the TVL items into ecs.cfg somehow some extra spaces got into the 'FILE : '
  lines and so ECS was looking for "   :  TVL.TXT" for example. So , a little
  editing repair work and now everything works great!!

      Now for a question. I want to get the VCR to record my favorites! I
  understand the selection of favs no problem. Now I need to get the 'IR stuff'
  working using my HV-PC w/ Xantech dual emitters plugged into the back. Help
file
  describes how to input the IR signal data but I want to know if I can simply
  edit the existing VCR:REC ect items instead of starting over. Also, I don't
need
  the Announcement along w/ the Record (am using the bedroom TV/VCR for this and
  the 'BOSS' will get very upset if the computer starts announcing that it will
  'Record Poirot in 60 seconds' at 2am!!!). Can this be done?

      Thanks,

      Tom

  subject (prev) or (next) | time (prev) or (next) | author (prev) or (next) | view more subjects



Services provided by [NetBloc]®! NetBloc Solutions Inc.
Terms of use. Indexing software (c) 1999 Lin-De, Inc .