Subject: From: Date:

Need help troubleshooting A.J. Griglak Fri, 28 Jan 2000 12:33:13 -0500

---

I'm having problems with ECS "seeing" PCL commands on housecode B.
Housecode A is working fine - no problems at all.  With housecode B, the
receiver is working fine - any modules not integrated with ECS are working
fine.  I'm using a new Ocelot (formerly CPU-XA).

I've got an event that speaks the weather when B5/Off is pressed.  It
doesn't work.  There is also a motion detector set to B10 which doesn't
work.  I also have some light scenes set to B1 On/Off that don't work.
However, a lamp attached to a module set at B2 works fine (no interaction
with ECS).

I've moved the receiver around, I've changed the housecode to C (of course,
changing the event).  I've unplugged the Ocelot and two-way interface and
let them sit for an hour, then rebooted the computer - still nothing.

This all started to happen around the same time that I had those problems
with the TTS and wave engine.  (RE:TTS Error 1/25/00)

Do I need to install the C-Max Control software that came with the Ocelot?
(I didn't).

Thanks in advance

-=A.J.

---