Subject: From: Date:

Re: [ECS] SDK VR ECS Mark Gilmore Sun, 23 Aug 1998 08:28:03 -0700

---

We decided that a spoken ack would best be done by the Event
responding.

LEC1964@aol.com wrote:
> 
> Mark,
> 
>      I have another question. When using the Item "Voice-Command" should the
> verification to "repeat the command" be verbal? I can give you these details.
> One of my Voice-Commands is named "VR All Lights Off". As outlined in
> 5.9.4.114 it is defined:
>           Type               :Voice-Command
>           Command       :"All Lights Off"
>           Verify              :Yes
>           Acknowledge   :"Go Ahead"
> 
> It is in a Lights Event:
>            If          VR All Lights Off          Is Now          True
>            then      PLC Cmd A                Set               All Units Off
>            then      PC-Bell                      Set                1
> 
>      If I issue the verbal command "All Lights Off", All Lights Off will be
> displayed in text form in the VR window, if shortly thereafter I issue the
> verbal command "Go Ahead", Go Ahead will be displayed for a brief time in the
> VR window replacing "All Lights Off". and immediately following the PLC signal
> will be sent. All PLC lights that are on will then go to their off states. The
> only verification was visual. I did hear the PC-Bell which should give some
> indication that the sound card is functional.
>      Is this correct, the verification is visual or do I need to do something
> else?
> 
> Thanks, Larry C.

-- 
Mark Gilmore
Omnipotence
Voice:423-745-0026
FAX  :423-745-1714
http://members.a2zsol.com/omnipotence.html

---