Subject: From: Date:

RE: [ECS] Modem and Set up Michael David Mon, 24 Aug 1998 00:14:17 -0400

---

Hi Don!

Good speaking with you as well.  Glad your voice is coming back.

Not sure why a110 isn't working for a port . DT assignment. You might try
f110.

Have you tried sending AT#CLS=8 to the modem with a Win95 terminal program
to see if the modem will even respond to that command?

Anybody else have any ideas here?

On the Dialogic board, I was thinking several of us would pitch in to pay
for Mark's time to implement it into ECS.  What do you guys think?

Cheers!

Michael David
michael@michaeldavid.com


-----Original Message-----
From:	Don Stephens [mailto:don5@mindspring.com]
Sent:	Sunday, August 23, 1998 11:52 PM
To:	ecs-list@vancouver.ml.org; michael@michaeldavid.com
Subject:	Re: [ECS] Modem and Set up


-----Original Message-----
From: Michael David <michael@michaeldavid.com>
To: ecs-list@vancouver.ml.org <ecs-list@vancouver.ml.org>
Date: Sunday, August 23, 1998 8:29 PM
Subject: RE: [ECS] Modem and Set up


>HI Don!
>
>Perhaps I could be even more help if I could remember which side the
"Clear"
>key is on.  :)

Oh Yeah!

Enjoyed squeaking to you. My voice is somewhat back.
>
>Your port assignments for ECS.EXE are now done in Win95
>(Start->Settings->Control Panel->System->Device Manager->Ports).  The port
>configs in ECS.DT are only used by ECS.EXE to check for conflicts, not to
>actually define the parameters for the port.
>
>So, If Win95 sees your modem as COM13, then ECS.EXE should as well.  What
do
>you mean by "This must be wrong because if I save SETUP and start up ECS
the
>address for COM13 has changed..."?  Do you mean in the .DT file?
>
>What modem are you using?

Ah...I always manage to leave something out. Looking at the options in SETUP
I could not find an address similiar to what I tried to insert. I plugged
the value "a110" in anyway saved it and restarted ECS. That is where the
Modem Error message came in. I think ECS sees the address conflict between
the .DT file and Win95 and
disconnects the modem.

I'm hoping that I simply have put the wrong address in the DT file, as the
modem works outside of ECS just fine.

On another front, (and I'm sure our mail will cross paths) what did you have
in mind for the proposed new Phone Card?

Thanks again for your help yesterday.

Don

---