Subject: From: Date:

Re: [ECS] One question, one problem Mark Sekelsky Thu, 29 Jun 2000 20:35:08 -0500

---

I found a bit of a workaround. If I modify the ecs_www.bat file to not goto
exit after executing the edm stuff postie runs just fine.  Then I made an
change to have winipcfg.out sent to me as an attachment so that I can open
it and see the actual IP address.  Not necessarily pretty, but it seems to
work.

-----Original Message-----
From: Mark Sekelsky [mailto:Mark@sekelsky.com]
Sent: Tuesday, June 27, 2000 8:07 PM
To: Mark Gilmore
Subject: RE: [ECS] One question, one problem


Yes.  Attached is the ecs_www.htm file that was created at the same time as
the attached winipcfg.out file (time stamp is only 2 seconds different).

-----Original Message-----
From: Mark Gilmore [mailto:omnip@usit.net]
Sent: Tuesday, June 27, 2000 7:46 PM
To: Mark Sekelsky
Subject: Re: [ECS] One question, one problem


Did it make an ECS_WWW.HTM file ???
--
Mark Gilmore
Omnipotence (ECS home automation software)
http://www.usit.com/omnip
423-745-0026
Hours: Mon-Sat, 9AM-8PM/EST


Mark Sekelsky wrote:
>
> I execute that entire line manually, the screen changes ever so briefly to
> the edm stuff, I can see some reverse text (black on white)then my
original
> screen pops back.  If I press "pause" while in the edm screen I see
nothing
> unusual, but then I am not sure what to look for.
>
> I think there may also be a second issue (and perhaps related to the
first).
> This PC is part of a home network and has an IP address assigned to it.
> When I look at the htm file that is to be emailed to me the link contains
> the static IP address assigned to the PC not the IP address that I am
> getting from my ISP. The correct IP address is the 207.xxx.xx.xx one.
>
> -----Original Message-----
> From: Mark Gilmore [mailto:omnip@usit.net]
> Sent: Tuesday, June 27, 2000 7:20 AM
> To: Mark Sekelsky
> Subject: Re: [ECS] One question, one problem
>
> Execute the START...EDM command manually,
> and you should see the error.
> --
> Mark Gilmore
> Omnipotence (ECS home automation software)
> http://www.usit.com/omnip
> 423-745-0026
> Hours: Mon-Sat, 9AM-8PM/EST
>
>   ------------------------------------------------------------------------
>                    Name: WINIPCFG.OUT
>    WINIPCFG.OUT    Type: unspecified type (application/octet-stream)
>                Encoding: 7bit

---