Subject: From: Date:

Re: [ECS] TVL Trouble Mark Gilmore Sun, 30 Jul 2000 07:53:36 -0400

---

Joe,
We need a dump (like below) when you enter those
same args at the DOS prompt.
-- 
Mark Gilmore
Omnipotence (ECS home automation software)
http://www.usit.com/omnip
423-745-0026
Hours: Mon-Sat, 9AM-8PM/EST


Joseph & Jessica Colson III wrote:
> 
> Mark -
> 
>      For TVL.Bat item I entered "TVL.BAT DITV 8 0".  It has
> been this way since I tried to get it to work.  I'm I supposed
> to use something else?  I have also tried changing the 0 to 1
> with not luck.
> 
> Joe Colson
> 
> -----Original Message-----
> From: Mark Gilmore [mailto:omnip@usit.net]
> Sent: Friday, July 28, 2000 9:43 PM
> To: ecs-list@netbloc.com
> Subject: Re: [ECS] TVL Trouble
> 
> Joe,
> You did not enter the arguments.
> See your TVL.BAT Item.
> --
> Mark Gilmore
> Omnipotence (ECS home automation software)
> http://www.usit.com/omnip
> 423-745-0026
> Hours: Mon-Sat, 9AM-8PM/EST
> 
> Joseph & Jessica Colson III wrote:
> >
> > Mark, thanks for the reply.  Heres what happens when I go into
> > a dos prompt and enter tvl.bat
> >
> > C:\PROGRAM FILES\ECS>TVL.BAT
> >
> > C:\PROGRAM FILES\ECS>DEL TVLSTAT.TMP
> >
> > C:\PROGRAM FILES\ECS>
> > C:\PROGRAM FILES\ECS>IF ""=="" GOTO ERR
> >
> > C:\PROGRAM FILES\ECS>ECHO E > TVLSTAT.TMP
> >
> > C:\PROGRAM FILES\ECS>
> > C:\PROGRAM FILES\ECS>
> >
> > C:\PROGRAM FILES\ECS>_
> >
> > Thanks for your help,
> > Joe Colson
> >
> > -----Original Message-----
> > From: Mark Gilmore [mailto:omnip@usit.net]
> > Sent: Wednesday, July 26, 2000 5:42 PM
> > To: ecs-list@netbloc.com
> > Subject: Re: [ECS] TVL Trouble
> >
> > Execute TVL.BAT manually from the DOS prompt
> > to see what's going on
> > (that's all ECS is trying to do).
> > --
> > Mark Gilmore
> > Omnipotence (ECS home automation software)
> >
> > Joseph & Jessica Colson III wrote:
> > >
> > > A. J. thanks for the reply but that did not work.
> > > any other ideas?
> > >
> > > Joe Colson
> > >
> > > -----Original Message-----
> > > From: A.J. Griglak [mailto:aj@griglak.com]
> > > Sent: Wednesday, July 26, 2000 9:08 AM
> > > To: ecs-list@netbloc.com
> > > Subject: RE: [ECS] TVL Trouble
> > >
> > > Yes, mine was acting funny also.  I set TVL to true, but it wouldn't
> work
> > > right until I restarted ECS.  Try that...
> > >
> > > -=A.J.
> > >
> > > -----Original Message-----
> > > From: Joseph & Jessica Colson III [mailto:JColson@CajunNet.com]
> > > Sent: Wednesday, July 26, 2000 9:29 AM
> > > To: ecs-list@netbloc.com
> > > Subject: [ECS] TVL Trouble
> > >
> > >      Ok so I just upgraded to 4.4.005 and I cant get the
> > > tvl to download.  I have followed the instructions to the
> > > T and when I  set TVL Enabled to true a MSDOS window will flash
> > > I will hear a ding and that's it.  I have gone over the
> > > instructions twice with the same results.  Any Ideas?
> > > Is anyone else having trouble with this.
> > >
> > > thanks for any help
> > >
> > > Joe Colson
> > http://www.usit.com/omnip
> > 423-745-0026
> > Hours: Mon-Sat, 9AM-8PM/EST

---