Subject: From: Date:

RE: [ECS] phone-interface-c and external speaker Mark Sekelsky Fri, 28 Aug 1998 15:55:56 -0500

---

Mark,

Since my knowledge on the workings of modems is almost zippo I would
certainly be the last one to try and say exactly what is wrong.  However, it
would seem to me that if it were a hardware problem I would have the problem
right away as opposed to it always creeping up only after several days of
use.  I am fairly sure that had the same problem with my old modem as well.
To verify this, I will try running on that modem for a few days to see what
happens.

Mark S.

-----Original Message-----
From: Mark Gilmore [mailto:markgilmore@cococo.net]
Sent: Friday, August 28, 1998 9:40 AM
To: ecs-list@vancouver.ml.org
Subject: Re: [ECS] phone-interface-c and external speaker


Mark, I suspect a hardware problem, as the code
ALWAYS sets the modem for line & speaker output
while answering. You can see this command "AT#VLS=4"
during answer via ctrl-x.

I suspect that F5 only APPEARS to "fix" the problem,
when in actuality it is an intermitent problem
unrelated to ECS. Not also that the phn-answer rtn
resets the modem after answering.
--
Mark Gilmore
Omnipotence
Voice:423-745-0026
FAX  :423-745-1714
http://members.a2zsol.com/omnipotence.html

---