Subject: From: Date:

Re: [ECS] IR blaster schematic Mark Gilmore Wed, 16 Aug 2000 08:08:37 -0400

---

Hi Joe,
I don't know how many you could sell, but you
could probably price them at $20 or so (making
at least $15 per).
-- 
Mark Gilmore
Omnipotence (ECS home automation software)
http://www.usit.com/omnip
423-745-0026
Hours: Mon-Sat, 9AM-8PM/EST


joerut@epix.net wrote:
> 
> Mark
> 
> Have you tested this circuit? If you use more than one emmiter I
> would suggest a larger transistor even though the current is only
> pulsed for a short time. The IR Master 100 uses a similar setup but
> uses a TIP 111 transistor to drive the 3 emmiters. If you know
> someone that needs a bunch I may be able to make them. If you
> really think this may be a good item to reproduce I have contact
> that makes circuit boards and that would make it a whole lot easier.
> 
> Let me know
> Joe Rut
> 
> On 15 Aug 2000, at 12:25, Mark Gilmore wrote:
> 
> > Entry #7 at http://www.hometoys.com/tips/tips20.htm
> > shows a SIMPLE schematic for an IR blaster
> > (a very useful device that NO ONE makes).
> > Should anyone care to produce these things,
> > I know one person that needs 16 of them
> > (and I think many others will in the future).
> > --
> > Mark Gilmore
> > Omnipotence (ECS home automation software)
> > http://www.usit.com/omnip
> > 423-745-0026
> > Hours: Mon-Sat, 9AM-8PM/EST

---