Subject: From: Date:

RE: [ECS] New TV-Guide Mark Sekelsky Thu, 24 Aug 2000 20:26:10 -0500

---

I checked my .chn file and made some updates.  I did not do anything to
itpcst.def and never have.  Should I be editing this file to agree with
.chn? For both of these files do I put spaces or tabs between the channel
number and the station?


-----Original Message-----
From: Mark Gilmore [mailto:omnip@usit.net]
Sent: Thursday, August 24, 2000 6:41 AM
To: ecs-list@netbloc.com
Subject: Re: [ECS] New TV-Guide


Mark,
Check your {lineup}.CHN file & ITPCST.DEF files.
There are probably some new channels which one
or both of these files lack (add as needed).
--
Mark Gilmore
Omnipotence (ECS home automation software)
http://www.usit.com/omnip
423-745-0026
Hours: Mon-Sat, 9AM-8PM/EST


Mark Sekelsky wrote:
>
> Thanks Mark, it works great.  I do have one problem that I haven't figured
> out.  Anytime I "click" on a listing with a channel over 40 I get an error
> message that that number is an invalid selection.  As best I can tell all
> other numbers work just fine.
>
> I copied and pasted the channel setting event from example.cfg.  I did
have
> to modify the actual sending of the signal to conform to my Home Vision.
As
> numbers 02-09 are all OK I know that isn't the problem.
>
> -----Original Message-----
> From: Mark Gilmore [mailto:omnip@usit.net]
> Sent: Tuesday, August 22, 2000 7:59 PM
> To: ecs-list@netbloc.com
> Subject: Re: [ECS] New TV-Guide
>
> Hi Mark,
> I'll look at this tommorow, and will make ECS return
> ANY requested page IF an empty password is defined which
> applies to the requesting IP address (if not already).
> --
> Mark Gilmore
> Omnipotence (ECS home automation software)
> http://www.usit.com/omnip
> 423-745-0026
> Hours: Mon-Sat, 9AM-8PM/EST
>
> Mark Sekelsky wrote:
> >
> > I am trying to make use of the nifty new tv-guide.  ECS runs on a PC in
my
> > basement.  The main TV is up in the family room where I have another PC
> > running ACE.  What I want to be able to do is to bring up the
tv-guide.htm
> > on that PC and have ECS set the TV stations.  From what I can tell so
far
> if
> > I bring up tv-guide.htm directly I canNOT use it to have ECS set the
> > station.  It seems like I have to navigate to the TV Guide page via
> main.htm
> > first.
> >
> > Is this correct and if so is there a way to run tv-guide.htm directly?
> (ex.
> > launch http://192.168.1.1:3000/tv-guide.htm)
> >
> > Mark S

---