| ECS-L Home Automation and Security Archives |
| Subject: From: Date: | RE: [ECS] HELP !! Old Redac not send/recv x10 Michael David Thu, 31 Aug 2000 04:29:39 -0400 |
Hi Hilt! Hmmm. You to clarify something in your original message: When ECS sends a X10 commend, you see the LED flash on the TW, but the “X10 activity” light on the Redac does not. Is that what you are seeing? Cheers! Michael David michael@michaeldavid.com http://planetarydomains.com -----Original Message----- From: Hilton H. Augustine, Jr. [mailto:hilton@theaugustinefamily.com] Sent: Thursday, August 31, 2000 12:25 AM To: ecs-list@netbloc.com Subject: Re: [ECS] HELP !! Old Redac not send/recv x10 Michael/Joe, The 523's still work fine. I use one to control the thermostat. I can still send x10 and control the thermo. I switched 523's and the thermo still worked fine. Any other suggestions? Hilt thanks for the offer Joe ----- Original Message ----- From: Joseph Rutkowski <mailto:joerut@epix.net> To: ecs-list@netbloc.com <mailto:ecs-list@netbloc.com> Sent: Wednesday, August 30, 2000 6:50 AM Subject: Re: [ECS] HELP !! Old Redac not send/recv x10 Hello Did your TW-523 Possibly DIE?? If ECS communicates with the REDAC then it is probably still working. I just switched to the CM11A and may have a spare TW-523 if you need one. Later Joe Rut "Hilton H. Augustine, Jr." wrote: Hi all, It's been a while since I've been on the list (you know, work and all). Anyway, you know it must be serious. My (5 year old) Micro Redac stopped sending and receiving X10 signals last week. Lights flash on the X10 transceiver; communications & run lights flash too. The X10-Activity light stays off. What happened? I had to stoop to using a CP290 just to get a little of the lighting going. I still run ECS dos v3.3. Probably moving within a year so, not ready to rebuild this system. Anybody had/solved this problem. Hilt
Hi Hilt!
Hmmm. You to clarify something in your
original message: When ECS sends a
X10 commend, you see the LED flash on the TW, but the “X10 activity” light on
the Redac does not. Is that what
you are seeing?
Cheers!
Michael
David
michael@michaeldavid.com
http://planetarydomains.com
-----Original
Message-----
From: Hilton H. Augustine, Jr.
[mailto:hilton@theaugustinefamily.com]
Sent: Thursday, August 31, 2000
12:25 AM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HELP !! Old
Redac not send/recv x10
Michael/Joe,
The
523's still work fine. I use one to control the thermostat. I can still
send x10 and control the thermo. I switched 523's and the thermo still
worked fine. Any other suggestions?
Hilt
thanks
for the offer Joe
-----
Original Message -----
Sent: Wednesday, August 30,
2000 6:50 AM
Subject: Re:
[ECS] HELP !! Old Redac not send/recv x10
Hello
Did your
TW-523 Possibly DIE?? If ECS communicates with the REDAC then it is probably
still working. I just switched to the CM11A and may have a spare TW-523 if you
need one.
Later
Joe Rut
"Hilton
H. Augustine, Jr." wrote:
Hi all, It's been a while since I've been on the list (you know, work and
all). Anyway, you know it must be serious. My (5 year old) Micro Redac stopped sending and receiving X10
signals last week. Lights flash on the X10 transceiver; communications
& run lights flash too. The X10-Activity light stays off. What
happened? I had to stoop to using a CP290 just to get a little of the
lighting going. I still run ECS dos v3.3. Probably moving within a year so, not
ready to rebuild this system. Anybody had/solved this problem. Hilt