Subject: From: Date:

RE: [ECS] HELP !! Old Redac not send/recv x10 Michael David Thu, 31 Aug 2000 05:17:28 -0400

---

Ummm - that should have read: "Just to clarify...."

Sorry - it's waaaay too late.....  :)

Cheers!

Michael David
michael@michaeldavid.com
http://planetarydomains.com
Cheap Domain Names - Affordable Hi-Bandwidth Email & Web Hosting

-----Original Message-----
From: Michael David [mailto:michael@michaeldavid.com]
Sent: Thursday, August 31, 2000 4:30 AM
To: ecs-list@netbloc.com
Subject: RE: [ECS] HELP !! Old Redac not send/recv x10

Hi Hilt!

Hmmm.  You to clarify something in your original message:  When ECS sends a
X10 commend, you see the LED flash on the TW, but the "X10 activity" light
on the Redac does not.  Is that what you are seeing?

Cheers!

Michael David
michael@michaeldavid.com
http://planetarydomains.com

-----Original Message-----
From: Hilton H. Augustine, Jr. [mailto:hilton@theaugustinefamily.com]
Sent: Thursday, August 31, 2000 12:25 AM
To: ecs-list@netbloc.com
Subject: Re: [ECS] HELP !! Old Redac not send/recv x10

Michael/Joe,

The 523's still work fine.  I use one to control the thermostat. I can still
send x10 and control the thermo.  I switched 523's and the thermo still
worked fine.  Any other suggestions?

Hilt

thanks for the offer Joe
----- Original Message -----
From: Joseph Rutkowski

To: ecs-list@netbloc.com
Sent: Wednesday, August 30, 2000 6:50 AM
Subject: Re: [ECS] HELP !! Old Redac not send/recv x10

Hello
Did your TW-523 Possibly DIE?? If ECS communicates with the REDAC then it is
probably still working. I just switched to the CM11A and may have a spare
TW-523 if you need one.
Later
Joe Rut

"Hilton H. Augustine, Jr." wrote:
Hi all, It's been a while since I've been on the list (you know, work and
all).  Anyway, you know it must be serious. My (5 year old) Micro Redac
stopped sending and receiving X10 signals last week.  Lights flash on the
X10 transceiver; communications & run lights flash too.  The X10-Activity
light stays off.  What happened?  I had to stoop to using a CP290 just to
get a little of the lighting going. I still run ECS dos v3.3. Probably
moving within a year so, not ready to rebuild this system.  Anybody
had/solved this problem. Hilt

---