| ECS-L Home Automation and Security Archives |
| Subject: From: Date: | RE: [ECS] TV channels not being set Mark Sekelsky Sat, 2 Sep 2000 17:26:36 -0500 |
I tried the new wpdl.exe file but it didn't help. My tvl.txt file is the same one I have had all week (I download Sunday mornings). I found an ecsioc file set to read only. Changing the attribute allowed me to do a full install. Even after the full install I still get the RX TMO error. Debug files are attached. I am also including a couple of bitmaps I did quite a while ago. They are my *amateur* attempt to have an answering machine icon for my phone message icon. -----Original Message----- From: Mark Gilmore [mailto:omnip@usit.net] Sent: Saturday, September 02, 2000 4:35 PM To: ecs-list@netbloc.com Subject: Re: [ECS] TV channels not being set Mark, I think I have corrected this WPDL problem, but won't know for sure until I complete MY TVL download (currently in progress). I have uploaded this new WPDL to http://omnipotencesoftware.com/wpdl.zip and the OLD Windows-only version (WPDLWIN) to http://omnipotencesoftware.com/wpdlwin.zip If you just want it to work NOW :-), then download WPDLWIN.EXE and copy it to WPDL.EXE. I can't re-create any SETUP problem (and I did both an init and overwrite install). You may have a file set for write-only that should not be. Regarding the RX TMO, please send more info should it occur again (after you get TV stuff downloaded). I strongly suspect that this is due to the incomplete install. -- Mark Gilmore Omnipotence (ECS home automation software) http://omnipotencesoftware.com 423-745-0026 Hours: Mon-Sat, 9AM-8PM/EST Mark Sekelsky wrote: > > I noticed with the beta this morning (Saturday) that stations were not being > set. When I saw that a new beta was forthcoming (Saturday PM) I decided to > wait but the same issue exists. I bring up the TV-Guide and click on a > listing. In the bottom left corner of the browser window (I.E.) the correct > chan shows (i.e. Chan 18). There is nothing in the upper part of the > browser window where typically it would show the name of the station (as per > the .def file). After about 8-10 seconds I get an error message in ECS: > > ERROR:SCK_BF rxtmo (TCP_API_SRV) > > I also have a second problem that may or may not be related to ECS. When > running setup for the latest beta I receive an error at about 70% > completion. Like an idiot I didn't write down the exact verbiage. It was > some type of error indicating that there was a "move data - 115." I thought > this would be unique to the latest beta (bad file or something) but when I > went to reinstall the previous beta I got the same error. I rebooted and > tired again. Error always occurs about 70%. Based upon file dates my > ecs.exe IS the most current, but the installation never completed. > > Mark S