Same here, Mark. Same symptoms, and error message.

Don
  ----- Original Message ----- 
  From: Mark Sekelsky 
  To: ecs-list@netbloc.com 
  Sent: Saturday, September 02, 2000 5:49 PM
  Subject: RE: [ECS] TV channels not being set


  Attached, in case it is helpful is tvl.txt and tv-guide.htm.  Tvl.txt looks OK to
me.  Steps:
   
    a.. Fire up the browser (I.E. 5.x) 
    b.. "Surf" to http://192.168.1.1:3000/main.htm (this IP address is already "known"
to ECS and as such I can bypass the password page). 
    c.. Click on "TV-Guide." 
    d.. The TV-Guide page appears after about 8-10 seconds.  The address bar states:
http://192.168.1.1:3000/tv-guide.htm.  Immediately under the address bar is a long blank
drop down box.  Under that is the "Now" drop down box (for selecting days and times
other than "now.").  Immediately under that are the selections for the shows that are
currently on TV, drop down boxes for "Favorites" etc. 
    e.. When I click on a show (one of the gray buttons), say for example "09/02 6:30
PM 240 US Open Tennis 40" three things should happen:
    The status line in the IE window (very bottom of IE window) should indicate "Chan:40."
 This DOES happen.
    The top most drop down box should indicate that the station is being set to USA
(which is my channel 40).  This does NOT happen.
    The channel on the TV should be set to 40.  This does NOT happen.  No signal is
sent at all.

    f.. After about 8-10" I get the error message:

    ERROR:SCK BF rxtmo (TCP API SRV)
   
  Subsequent button clicks yield the above results EXCEPT that the error message in
ECS doe NOT re-occur.
   
  I am running W98 and the most recent beta. My TVL events all come from example.cfg
with modifications as needed for my system (for example Home Vision IR signals). I have
not touched any of the events or items in a couple of weeks.





  -----Original Message-----
  From: Mark Gilmore [mailto:omnip@usit.net]
  Sent: Saturday, September 02, 2000 6:32 PM
  To: ecs-list@netbloc.com
  Subject: Re: [ECS] TV channels not being set


  Assuming that you have verified the contents of TVL.TXT,
  please tell me exact steps required to re-create the problem
  (and what is not happening that you expect to happen).
  Thanks,
  --
  Mark Gilmore
  Omnipotence (ECS home automation software)
  http://omnipotencesoftware.com
  423-745-0026
  Hours: Mon-Sat, 9AM-8PM/EST

----- Original Message -----

From: Mark Sekelsky

To: ecs-list@netbloc.com

Sent: Saturday, September 02, 2000 5:49 PM

Subject: RE: [ECS] TV channels not being set

Attached, in case it is helpful is tvl.txt and tv-guide.htm.  Tvl.txt looks OK to me.  Steps:

 

• Fire up the browser (I.E. 5.x)
• "Surf" to http://192.168.1.1:3000/main.htm (this IP address is already "known" to ECS and as such I can bypass the password page).
• Click on "TV-Guide."
• The TV-Guide page appears after about 8-10 seconds.  The address bar states: http://192.168.1.1:3000/tv-guide.htm.  Immediately under the address bar is a long blank drop down box.  Under that is the "Now" drop down box (for selecting days and times other than "now.").  Immediately under that are the selections for the shows that are currently on TV, drop down boxes for "Favorites" etc.
• When I click on a show (one of the gray buttons), say for example "09/02 6:30 PM 240 US Open Tennis 40" three things should happen:
  The status line in the IE window (very bottom of IE window) should indicate "Chan:40."  This DOES happen.
  The top most drop down box should indicate that the station is being set to USA (which is my channel 40).  This does NOT happen.
  The channel on the TV should be set to 40.  This does NOT happen.  No signal is sent at all.
  
• After about 8-10" I get the error message:
  
  ERROR:SCK BF rxtmo (TCP API SRV)

 

Subsequent button clicks yield the above results EXCEPT that the error message in ECS doe NOT re-occur.

 

I am running W98 and the most recent beta. My TVL events all come from example.cfg with modifications as needed for my system (for example Home Vision IR signals). I have not touched any of the events or items in a couple of weeks.

-----Original Message-----
From: Mark Gilmore [mailto:omnip@usit.net]
Sent: Saturday, September 02, 2000 6:32 PM
To: ecs-list@netbloc.com
Subject: Re: [ECS] TV channels not being set


Assuming that you have verified the contents of TVL.TXT,
please tell me exact steps required to re-create the problem
(and what is not happening that you expect to happen).
Thanks,
--
Mark Gilmore
Omnipotence (ECS home automation software)
http://omnipotencesoftware.com
423-745-0026
Hours: Mon-Sat, 9AM-8PM/EST