Subject: From: Date:

Re: [ECS] [Fwd: [ECS] AD "Bobcat" Modules] Tom Hutchins Wed, 27 Sep 2000 19:04:10 -0400

---

Mark,

There is no OCELOT. The Leopard is acting as the OCELOT as well as the
touchscreen, (has the touchscreen interface with the guts of the OCELOT) and
the Leopard is the only thing attached to the computer!

Does that help?

Tom
----- Original Message -----
From: "Mark Gilmore" <omnip@usit.net>
To: <ecs-list@netbloc.com>
Sent: Wednesday, September 27, 2000 6:51 PM
Subject: Re: [ECS] [Fwd: [ECS] AD "Bobcat" Modules]


> Tom,
> Do you have any OTHER kinds of modules ?
> Perhaps your Ocelot firmware is too old
> to recognize the Leopard (??).
> --
> Mark Gilmore
> Omnipotence (ECS home automation software)
> http://omnipotencesoftware.com
> 423-745-0026
> Hours: Mon-Sat, 9AM-8PM/EST
>
>
> Tom Hutchins wrote:
> >
> > Bob,
> >
> > I have the Leopard working fine using CMAX. However, CMAX doesn't have
near
> > the ease of use as ECS. I don't have any other modules hooked up yet as
I
> > prefer to make sure each thing is working properly before I add the next
> > item. Sure makes troubleshooting easier.
> >
> > Tom
> >
> > ----- Original Message -----
> > From: <bob.terfruchte@amd.com>
> > To: <ecs-list@netbloc.com>
> > Sent: Wednesday, September 27, 2000 6:34 PM
> > Subject: RE: [ECS] [Fwd: [ECS] AD "Bobcat" Modules]
> >
> > > Tom,
> > >
> > > Can you "find" the modules with the C-Max software from ADI??
> > >
> > > Bob Terfruchte, Jr.
> > > Austin, TX
> > >
> > > -----Original Message-----
> > > From: Mark Gilmore [mailto:omnip@usit.net]
> > > Sent: Wednesday, September 27, 2000 5:29 PM
> > > To: ecs-list@netbloc.com
> > > Subject: Re: [ECS] [Fwd: [ECS] AD "Bobcat" Modules]
> > >
> > >
> > > Tom,
> > > As I suspected, your dump shows that the OCELOT is
> > > reporting NO modules of any kind. You might want to
> > > call ADI on this (the 254's signify "no module"):
> > >
> > > Transmit ("get unit types" command):
> > > 42 0 0 1 176 0 148 39
> > >
> > > Received:              1st 2nd 3rd ...
> > > 42 0 0 1 176 0 254 254 254 254 254 254 254 254 254 254 254 254
> > > 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254
> > > ....
> > > --
> > > Mark Gilmore
> > > Omnipotence (ECS home automation software)
> > > http://omnipotencesoftware.com
> > > 423-745-0026
> > > Hours: Mon-Sat, 9AM-8PM/EST

---