Subject: From: Date:

Re: [ECS] [Fwd: [ECS] AD "Bobcat" Modules] Mark Gilmore Wed, 27 Sep 2000 19:05:36 -0400

---

Yes - this is CRITICAL information.
I don't know if this will work at all,
as this is not a supported configuration.
And I know it won't work unless the Leopard
acts exactly like the Ocelot.
-- 
Mark Gilmore
Omnipotence (ECS home automation software)
http://omnipotencesoftware.com
423-745-0026
Hours: Mon-Sat, 9AM-8PM/EST


Tom Hutchins wrote:
> 
> Mark,
> 
> There is no OCELOT. The Leopard is acting as the OCELOT as well as the
> touchscreen, (has the touchscreen interface with the guts of the OCELOT) and
> the Leopard is the only thing attached to the computer!
> 
> Does that help?
> 
> Tom
> ----- Original Message -----
> From: "Mark Gilmore" <omnip@usit.net>
> To: <ecs-list@netbloc.com>
> Sent: Wednesday, September 27, 2000 6:51 PM
> Subject: Re: [ECS] [Fwd: [ECS] AD "Bobcat" Modules]
> 
> > Tom,
> > Do you have any OTHER kinds of modules ?
> > Perhaps your Ocelot firmware is too old
> > to recognize the Leopard (??).
> > --
> > Mark Gilmore
> > Omnipotence (ECS home automation software)
> > http://omnipotencesoftware.com
> > 423-745-0026
> > Hours: Mon-Sat, 9AM-8PM/EST
> >
> >
> > Tom Hutchins wrote:
> > >
> > > Bob,
> > >
> > > I have the Leopard working fine using CMAX. However, CMAX doesn't have
> near
> > > the ease of use as ECS. I don't have any other modules hooked up yet as
> I
> > > prefer to make sure each thing is working properly before I add the next
> > > item. Sure makes troubleshooting easier.
> > >
> > > Tom
> > >
> > > ----- Original Message -----
> > > From: <bob.terfruchte@amd.com>
> > > To: <ecs-list@netbloc.com>
> > > Sent: Wednesday, September 27, 2000 6:34 PM
> > > Subject: RE: [ECS] [Fwd: [ECS] AD "Bobcat" Modules]
> > >
> > > > Tom,
> > > >
> > > > Can you "find" the modules with the C-Max software from ADI??
> > > >
> > > > Bob Terfruchte, Jr.
> > > > Austin, TX
> > > >
> > > > -----Original Message-----
> > > > From: Mark Gilmore [mailto:omnip@usit.net]
> > > > Sent: Wednesday, September 27, 2000 5:29 PM
> > > > To: ecs-list@netbloc.com
> > > > Subject: Re: [ECS] [Fwd: [ECS] AD "Bobcat" Modules]
> > > >
> > > >
> > > > Tom,
> > > > As I suspected, your dump shows that the OCELOT is
> > > > reporting NO modules of any kind. You might want to
> > > > call ADI on this (the 254's signify "no module"):
> > > >
> > > > Transmit ("get unit types" command):
> > > > 42 0 0 1 176 0 148 39
> > > >
> > > > Received:              1st 2nd 3rd ...
> > > > 42 0 0 1 176 0 254 254 254 254 254 254 254 254 254 254 254 254
> > > > 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254
> > > > ....
> > > > --
> > > > Mark Gilmore
> > > > Omnipotence (ECS home automation software)
> > > > http://omnipotencesoftware.com
> > > > 423-745-0026
> > > > Hours: Mon-Sat, 9AM-8PM/EST

---