Subject: From: Date:

Re: [ECS] Re: BETA upload Bill Walters Tue, 28 Nov 2000 13:17:51 -0600

---

Daniel,

AS far as cost effective, you can't get much cheaper for all you want than
the Ocelot and SECU16 combo;  from Worthington, the pair will set you back
about $225.  They are what I'm using now.

Bill Walters

----- Original Message -----
From: "Daniel Dubay" <ddubay@med.umich.edu>
To: <ecs-list@netbloc.com>
Sent: Tuesday, November 28, 2000 12:16 PM
Subject: [ECS] Re: BETA upload


> I just tried to upgrade to ECS 4.4.011 from 4.3.004 to incorporate a fix
in serial byte.  The new version rejected my config because of PLC
Interface-2C.  Is this no longer supported?
>
> As I am having trouble getting my IR interface working again since I
moved, maybe it is time to upgrade.  What is the most user friendly device
that has IR, Relay outputs, digital and analog inputs?  I don't use PLC.
Any advice?
>
> Thanks
> Daniel Dubay
>
>
> >>> Mark Gilmore <omnip@usit.net> 11/27/00 04:11PM >>>
> Hi all,
> The ECS 4.4.012 BETA has been released/uploaded, and
> incorporates the changes below.
> Upgrade instructions are attached.
> Auth code is UNCHANGED.
>
> http://omnipotencesoftware.com/ecsb.zip (Win/complete)
> http://omnipotencesoftware.com/ecsexeb.zip (Win/executables only)
> http://omnipotencesoftware.com/ecslnxb.zip (Linux/complete)
> http://omnipotencesoftware.com/ecslnxexeb.zip (Linux/executables only)
>
> 4.4.012 (11/27/00)
>
>     96) A new Type (TOUCH-SCREEN-K-TEXT) is now supported
> (for displaying text on the LEOPARD).
>
>     97) When resetting PHONE-INTERFACE-C, ECS now ignores errors on
> "optional"
> commands (in PHNC0.SET/PHNC1.SET).
>
>     98) If ECS determines that PHONE-INTERFACE-C has no speaker,
> it will set the default output to LINE (instead of LINE/SPEAKER).
> Any subsequent attempts to route sound thru the speaker will
> trigger an error.
>
> *   99) As one customer reported "garbled sound" with his US ROBOTICS
> modem,
> ECS now implements code specific to that modem when converting .WAVs
> to ADPCM (the format required by the modem) and vice-versa.
> If you have a US ROBOTICS modem, please let us know the results of
> this change.
>
>    100) The ECS/LINUX Event Editor now supports EXPORT/IMPORT buttons,
> so as
> to allow the user to EXPORT the Event to a text file (e.txt), edit
> this file which any desired editor, and then IMPORT the file back
> into the editor.
> --
> Mark Gilmore
> Omnipotence (ECS home automation software)
> http://omnipotencesoftware.com
> 423-745-0026
> Hours: Mon-Sat, 9AM-8PM/EST
>
>

---