Subject: From: Date:

Re: [ECS] Zoom Modem Woes Bill Walters Sat, 05 Sep 1998 03:44:09 -0500

---

Don,

Pull out your Windows 95 CD-ROM and install HyperTerminal.  It's not good for
much else (IMHO) but I've been using it watching data get sent out from ECS to
serial port.

It's pretty simple to "dope out"; ask for it to open the com port your modem is
on and set same stop bits, parity, word-length, then you're in business!

Bill Walters


don.sb.net@sb.net wrote:

> I'm still fighting my 56k Zoom Modem and have the sinking feeling that it's
> just not going to work. Part of my problem is that I don't have a simple
> windows comm program where I can type the AT commands and see the results.
> Is it correct to assume that if I modify PHN_C.SET while in ECS (Shelling to
> DOS ) and then resetting the modem (F5), that I will see the actual results
> of that change, or do I need to exit ECS and reinitialize in order to see
> what AT commands work?
>  The reason I ask is that some of the few AT commands that came with my modem
> booklet don't work if I edit PHN_C.SET while shelling from ECS (using
> <Ctrl>, S ) and upon re-entering ECS resetting the modem.
>
> Don

---